The Canadian Way of Quality Products, Competitve Prices!
You have no item in your shopping cart

List Of Categories

Software
Steel Materials
UTM Machines
New Products Promotions News And Events Contact Us FAQs
You have no item in your shopping cart

4in Neoprene pads, Shore A Durometer 50 (set of 2) 2612213

ASTM C1231/1231M, AASHTO T 22

20.00



Diameter Material Dimension
4in Neoprene rubber Dia.105*H12.7 mm


Concrete cylinders were tested for compressive strength using two capping systems. Neoprene pads confined in extrusion controllers were compared with sulfur-mortar caps for differences in testing variation, average strength, and economy. Additionally, neoprene pads are substantially less costly and hazardous than sulfur-mortar caps. Choice of Shore A durometer (hardness) is determined by the amount of compression with which the cylinder will be tested. Recommended durometers are: 1500 to 6000 psi (10 to 40) MPa: 50 durometer 2500 to 7000 psi (17 to 50) MPa: 60 durometer 4000 to 7000 psi (28 to 80) MPa: 70 durometer Pad Caps may be reused up to 100 times when testing in these ranges, however they should be discarded if they show excessive wear or cracking.

Cantrol uses cookies to provide its customers with a customized web experience and allow them to visit again a website without having to enter each time the same information.